Garage Equipment & Tools - Suspension & Running Gear

Shop by Category

Shop by Brand

Suspension & Running Gear

16" 200mm Tie Rod End Lifter Seperator Splitter Fork Ball Joint Breaker TE829

$12.50

Add to Cart Compare
27mm Pitman Steering Arm Linkage Gear Bearing Puller Remover Tie Rod End AT589

$13.01

Add to Cart Compare
2pc Boot Clamp Pliers CV Clamp Tool CV Joint Boot Clamp Pliers TE752

$19.00

Add to Cart Compare
2pc Spring Compressors Lock Pins MacPherson Struts Shock Absorber Car TE863

$37.35

Add to Cart Compare
33mm Pitman Steering Arm Linkage Gear Bearing Puller Remover Tie Rod End AT578

$14.80

Add to Cart Compare
370 x 82mm Coil Spring Compressor Twin Hook Clamp Suspension Struts Clasp

$20.74

Add to Cart Compare
5pc Tie Rod End Pitman Arm Kit Ball Joint Splitter Separator TE278

$23.51

Add to Cart Compare
8" 400mm Tie Rod End Lifter Seperator Splitter Fork Ball Joint Breaker TE827

$12.23

Add to Cart Compare
Axle Boot Kit Clamp Pliers for VAG Mercedes Toyota 479 Adjustable Claws AT254

$19.45

Add to Cart Compare
Ball Joint Splitter / Tie Rod End Remover / Pitman Arm Kit 5pcs By BERGEN AT809

$30.91

Add to Cart Compare
Ball Joint Splitter Tie & Track Rod End Lifter Separator Scissor Knuckle TE175

$17.38

Add to Cart Compare
Bush & Ball Joint Splitter Separator Remover / Installer Mercedes in Situ AT575

$90.17

Add to Cart Compare
Bush / Silent Block Removal Extractor Puller & Installer VAG Seat Audi VW AU013

$45.08

Add to Cart Compare
Coil spring / strut / shocks compressor / clamp 250mm (pair) U.S.PRO TOOLS AT852

$20.60

Add to Cart Compare
Coil Spring Compressor Clamp With Adjustable Claws Total Length 300mm

$18.68

Add to Cart Compare
Combination Wheel Alignment / Track Rod End Wrench / Spanner 20 & 22mm AU015

$15.14

Add to Cart Compare
CV boot clamp / drive shaft band pliers VW / Vauxhall / Opel / Ford AT814

$35.43

Add to Cart Compare
CV Boot Clamp Pliers Crimps and Cuts. AT343

$20.29

Add to Cart Compare
CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655

$25.75

Add to Cart Compare
Front Suspension Bush Remover Extractor Puller Installer VAG VW Skoda Seat AT294

$47.65

Add to Cart Compare
Heavy Duty Hydraulic & Manual Ball Joint Splitter - 12 Ton Remover Breaker

$106.92

Add to Cart Compare
Large Ball Joint Separator For Fit Type Ball Joints For Cars Light Trucks HGV

$107.57

Add to Cart Compare
Master Ball Joint Service Kit Separator / Removal / Remover Tool AN020

$129.47

Add to Cart Compare
McPherson Spring Compressor Coil Clamp Tuning Car Struts Suspension 65-212mm

$128.19

Add to Cart Compare
Professional Coil Spring Compressor / Clamp >370mm by U.S.Pro tools AT209

$21.89

Add to Cart Compare
Steering Rack Knuckle Tie Rod End Track Axial Joint Removal Tool 30-45mm AU018

$95.32

Add to Cart Compare
Steering Rack Knuckle Tie Rod End Track Axial Joint Removal Tool 35-45mm AT685

$46.37

Add to Cart Compare
Sub Frame Arm Bush Installer / Remover Extractor for Mercedes Benz BMW Bergen

$115.93

Add to Cart Compare
Tie rod end / Pitman Arm Remover Puller Steering Arm Linkage Gear Bearing Extractor

$14.30

Add to Cart Compare
Track rod end remover and installer 28mm - 35mm AT688

$26.41

Add to Cart Compare
Universal Ball Joint Extractor Tie Rod Track End Lifter Splitter Separator 2pc Bergen

$28.66

Add to Cart Compare
Universal Ball Joint Extractor Tie Track Rod End Lifter 32-80mm Splitter Seperator TE927

$37.68

Add to Cart Compare
Universal Coil Spring Compressor Clamp 70mm - 180mm Suspension Remover

$29.62

Add to Cart Compare
Universal Tie Rod End Remover / Removal / Wrench Tool 32mm - 42mm BERGEN AT113

$19.45

Add to Cart Compare
Universal Tie Rod End Remover / Removal / Wrench Tool 33mm - 42mm BERGEN AT272

$21.89

Add to Cart Compare
Valve spring compressor set 9pcs by U.S Pro AT435

$25.75

Add to Cart Compare
VW VAG Polo Bushing Tool Bush Remover Replacement Set Silent Blocks

$44.43

Add to Cart Compare
Wheel Alignment Tracking Gauge Trakrite for Cars, Vans Suspension LSR12

$93.40

Add to Cart Compare
Wishbone extractor bottom arm control tool / wheel bearing set by BERGEN AT791

$119.80

Add to Cart Compare

16" 200mm Tie Rod End Lifter Seperator Splitter Fork Ball Joint Breaker TE829

Specially designed to separate and remove worn out ball joints easily, the angled head of the fork helps to separate the ball joint quickly and efficiently. Drop forged steel body Tool separates ball joints from steering knuckle Suitable for most small...

$12.50

Add to Cart Compare
27mm Pitman Steering Arm Linkage Gear Bearing Puller Remover Tie Rod End AT589

Professional tool for commercial or occasional use Pitman arm puller is designed to pull off the pitman arm off the steering gear in the majority of cars / vans and small trucks Also suitable for gear wheel and bearing puller applications Heavy duty...

$13.01

Add to Cart Compare
2pc Boot Clamp Pliers CV Clamp Tool CV Joint Boot Clamp Pliers TE752

CV Joint Clamp Banding Tool: Effective tool for installing CV clamps. The standard banding tool works with the installer's ratchet and 1/2" socket Use the provided lever to tension the clamp CV Boot Clamp Pliers: Crimps and flattens ear type clamps...

$19.00

Add to Cart Compare
2pc Spring Compressors Lock Pins MacPherson Struts Shock Absorber Car TE863

Compresses the coil spring to replace the shock absorber unit or spring. Also allows for repairs on bent struts, strut tubes and damaged pieces. Forged construction, Acme threaded rod, and builtin detent pins to help lock the coil in place. Fast and...

$37.35

Add to Cart Compare
33mm Pitman Steering Arm Linkage Gear Bearing Puller Remover Tie Rod End AT578

Professional tool for commercial or occasional use Pitman arm puller is designed to pull off the pitman arm off the steering gear in the majority of cars / vans and small trucks Also suitable for gear wheel and bearing puller applications Heavy duty...

$14.80

Add to Cart Compare
370 x 82mm Coil Spring Compressor Twin Hook Clamp Suspension Struts Clasp

Drop Forged screws and cast jaws. Wrap over coil claws for extra safety. Suitable for use where space under wheel arch is limited. Spring not included: Use with 1/2"sq drive wrench. Black oxide finish to reduce corrosion 370 x 82mm 21mm nut size for...

$20.74

Add to Cart Compare
5pc Tie Rod End Pitman Arm Kit Ball Joint Splitter Separator TE278

Professional tool for commercial or occasional use. High quality kit for splitting ball joints, tie rods etc. Drop forged chrome vanadium steel forks. Includes three forks for various sized ball joints. Internal jaw widths are 17mm, 24mm & 28mm. Includes...

$23.51

Add to Cart Compare
8" 400mm Tie Rod End Lifter Seperator Splitter Fork Ball Joint Breaker TE827

Specially designed to separate and remove worn out ball joints easily, the angled head of the fork helps to separate the ball joint quickly and efficiently. Drop forged steel body Tool separates ball joints from steering knuckle Suitable for most small...

$12.23

Add to Cart Compare
Axle Boot Kit Clamp Pliers for VAG Mercedes Toyota 479 Adjustable Claws AT254

Suitable for progressively adjustable clamps without lug holding down device. Manufactures such as VAG, Mercedes and Toyota (479) install these clamps on their axle boots. Special designed claws for easy application and Automatic opening. Made for...

$19.45

Add to Cart Compare
Ball Joint Splitter / Tie Rod End Remover / Pitman Arm Kit 5pcs By BERGEN AT809

Ball joint Splitter Professional tool for commercial or occasional use Ideal for separating ball joints / tie rods / pitman arms etc. Manufactured from chrome vanadium steel for strength and durability. Suitable for most vehicles and light...

$30.91

Add to Cart Compare
Ball Joint Splitter Tie & Track Rod End Lifter Separator Scissor Knuckle TE175

Professional tools for all commercial and occasional use. High quality universal ball joint and tie/track rod end splitter / lifter. For removing the ball pivots on steering arms, tie rods, steering knuckles etc. High quality extra fine steel bolt...

$17.38

Add to Cart Compare
Bush & Ball Joint Splitter Separator Remover / Installer Mercedes in Situ AT575

For removing and installing ball joint and bushes on Mercedes Benz Series 220, 221 and 230. Designed for removing and installing the ball joint on car without removing any unnecessary parts. A real time saver not having to remove those extra corroded...

$90.17

Add to Cart Compare
Bush / Silent Block Removal Extractor Puller & Installer VAG Seat Audi VW AU013

Professional tool for commercial or occasional use. High quality set for removal and installation of bushes etc. For easy removal and replacement of silent blocks directly on the vehicle. No removal necessary. Collars to fit most bush sizes. Aluminium...

$45.08

Add to Cart Compare
Coil spring / strut / shocks compressor / clamp 250mm (pair) U.S.PRO TOOLS AT852

Coil spring compressors for working on struts on passenger cars and light commercials Suitable for compressing springs on vehicles when changing the springs or shocks Repair or replace shocks / struts and springs. Manufactured from heat treated...

$20.60

Add to Cart Compare
Coil Spring Compressor Clamp With Adjustable Claws Total Length 300mm

Professional tool for commercial or occasional use Manufactured from heat treated tempered steel and drop forged steel claws for added strength and durability when sing this tool. Used for repairing and replacing shock absorbers / struts and springs...

$18.68

Add to Cart Compare
Combination Wheel Alignment / Track Rod End Wrench / Spanner 20 & 22mm AU015

Professional tool for commercial or occasional use. Track rod end (steering arm) adjustment / alignment spanner. Universal for steering arms sizes 21mm & 22mm. Extra long so ideal for those hard to reach areas. Extra wide for added strength. Total...

$15.14

Add to Cart Compare
CV boot clamp / drive shaft band pliers VW / Vauxhall / Opel / Ford AT814

Used for the assembly of new stainless steel clamp bands where a torque setting is required CV boot band pliers with 3/8" torque drive. Suitable for the following Volkswagen / Audi / Vauxhall / OPEL / ford and others Can be used with any 3/8 drive...

$35.43

Add to Cart Compare
CV Boot Clamp Pliers Crimps and Cuts. AT343

Professional tool for commercial or occasional use Manufactured from hardened steel for strength and durability when using this application Will tension, secure, crimp and cut clamps. Provides fast and simple tensioning and securing of CV boot banding...

$20.29

Add to Cart Compare
CV Boot Joint Remover Separator Splitter Puller Propshaft Transmission AT655

Professional tool for commercial or occasional use. When a CV boot or gaiter is split instead of dismantling the front axle and drive shaft assembly, and keeps hands free for releasing retaining clip. Simply to use tool for accurate and time saving...

$25.75

Add to Cart Compare
Front Suspension Bush Remover Extractor Puller Installer VAG VW Skoda Seat AT294

Professional tool for commercial or occasional use. High quality set for removal and installation of bushes etc. Suitable for the removal and installation of the rear mounting bush on the front lower wishbone. Can be used in situ without removing the...

$47.65

Add to Cart Compare
Heavy Duty Hydraulic & Manual Ball Joint Splitter - 12 Ton Remover Breaker

Heavy-duty ball joint splitter suitable for commercial vehicles/HGVs. Designed to be operated manually or by 12 Ton hydraulic ram supplied. Maximum opening: 105mm Width between jaws: 34mm Includes a step-down thread adaptor that allows fitting of the...

$106.92

Add to Cart Compare
Large Ball Joint Separator For Fit Type Ball Joints For Cars Light Trucks HGV

Professional tool for commercial or occasional use Heavy duty large ball joint separator This large ball joint separator is designed for use on all cars and light trucks that have press fit type ball joints without the need to remove the control arm...

$107.57

Add to Cart Compare
Master Ball Joint Service Kit Separator / Removal / Remover Tool AN020

Professional kit for the everyday user and garage, complete in blow molded storage case. Very heavy duty tool. Will remove and install ball joints, universal joints and truck brake anchor pins. This kit is designed for use on all cars / light trucks and...

$129.47

Add to Cart Compare
McPherson Spring Compressor Coil Clamp Tuning Car Struts Suspension 65-212mm

Switching from strut bearings, shock absorbers and springs is safe and easy with this professional tool. The 3 pairs of interchangeable spring retainers and the supplied spacer, allow compression of all forms and sizes of springs. Application for: Fits...

$128.19

Add to Cart Compare
Professional Coil Spring Compressor / Clamp >370mm by U.S.Pro tools AT209

Professional tool for commercial or occasional use. High quality set of compressors for working on struts on passenger cars and light commercials. This listing is for one pair. Suitable for use where there is limited space under the wheel arches. ...

$21.89

Add to Cart Compare
Steering Rack Knuckle Tie Rod End Track Axial Joint Removal Tool 30-45mm AU018

Professional tool for commercial or occasional use. Track rod end (steering arm) remover and installer. This tool allows for the quick and easy removal and replacement of the inner steering ball joint without the need to dismantle the steering rack from...

$95.32

Add to Cart Compare
Steering Rack Knuckle Tie Rod End Track Axial Joint Removal Tool 35-45mm AT685

Professional tool for commercial or occasional use. Track rod end (steering arm) remover and installer. Universal for steering arms from 35mm 45mm. Simple and easy to use you can either use a 1/2" ratchet or 27mm spanner / socket to twist the end. ...

$46.37

Add to Cart Compare
Sub Frame Arm Bush Installer / Remover Extractor for Mercedes Benz BMW Bergen

Professional tool for commercial or occasional use For the removal or installation of sub frame arm bushes on Mercedes Benz and BMW's Designed for replacing the sub frame arm bushes whilst still on the vehicle and without the need for removing the rear...

$115.93

Add to Cart Compare
Tie rod end / Pitman Arm Remover Puller Steering Arm Linkage Gear Bearing Extractor

Professional tool for commercial or occasional use Pitman arm puller is designed to pull off the pitman arm off the steering gear in the majority of cars / vans and small trucks Ideal for removing tie rod ends and pit arm assemblies Also suitable for...

$14.30

Add to Cart Compare
Track rod end remover and installer 28mm - 35mm AT688

Professional tool for commercial or occasional use. Track rod end (steering arm) remover and installer. Universal for steering arms from 28mm 35mm. Simple and easy to use you can either use a 1/2" ratchet or 27mm spanner / socket to twist the end. ...

$26.41

Add to Cart Compare
Universal Ball Joint Extractor Tie Rod Track End Lifter Splitter Separator 2pc Bergen

Professional tool for commercial or occasional use Ball joint separator set Ball joint separators used for quick and easy separation of ball joint connectors Also useful for splitting track- rod ends and anti-roll bar mountings SMALL PULLER - Used for...

$28.66

Add to Cart Compare
Universal Ball Joint Extractor Tie Track Rod End Lifter 32-80mm Splitter Seperator TE927

Perfect ball joint splitter suitable for cars and light commercial vehicles. A must for the professional mechanics toolbox. The high quality extra fine steel bolt with its ball end help to high torque to help split the joint. For cars and light...

$37.68

Add to Cart Compare
Universal Coil Spring Compressor Clamp 70mm - 180mm Suspension Remover

Professional tool for commercial or occasional use Manufactured from chrome vanadium steel for strength and durability. Suitable for spring compressors 70mm 180mm. Tightening length 280mm maximum. SUITABLE FOR THE FOLLOWING VEHICLES AUDI (A4,...

$29.62

Add to Cart Compare
Universal Tie Rod End Remover / Removal / Wrench Tool 32mm - 42mm BERGEN AT113

Easily removes inner tie rod ends without disassembling rack and pinion. Designed specifically for the removal of the direction of the steering rod. Master tie rod tools easily replace inner tie rod ends Suitable for tie rods between 32mm and 42mm in...

$19.45

Add to Cart Compare
Universal Tie Rod End Remover / Removal / Wrench Tool 33mm - 42mm BERGEN AT272

Easily removes inner tie rod ends without disassembling rack and pinion. Designed specifically for the removal of the direction of the steering rod. Master tie rod tools easily replace inner tie rod ends Suitable for tie rods between 33mm and 42mm in...

$21.89

Add to Cart Compare
Valve spring compressor set 9pcs by U.S Pro AT435

Ideal for use on cars / vans / and motorbikes any application with small bore engines. The included adapters make it one of the most versatile kits on the market. Will remove and compress valves on most cylinder heads. Allows you to correctly fit the...

$25.75

Add to Cart Compare
VW VAG Polo Bushing Tool Bush Remover Replacement Set Silent Blocks

Professional tool for commercial or occasional use For easy removal and replacement of silent blocks directly on the vehicle Replacement on silent blocks on front axle. Wishbone, no removal necessary minimizing the workload SUITABLE FOR THE FOLLOWING...

$44.43

Add to Cart Compare
Wheel Alignment Tracking Gauge Trakrite for Cars, Vans Suspension LSR12

This simple tool is excellent for quickly checking the alignment of steered wheels on cars and light commercials. Simply drive one front wheel slowly over the trakrite. The pointer shows if adjustment is needed and in which direction. Suitable for all...

$93.40

Add to Cart Compare
Wishbone extractor bottom arm control tool / wheel bearing set by BERGEN AT791

Professional tool for commercial or occasional use The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing. ...

$119.80

Add to Cart Compare