Drill Pump Suitable for Oil & Fluids Diesel, Kerosene, Water TE456

A top quality drill pump. This drill pump may not be the cheapest around, but it is well made, high flow and will handle fluids that would destroy the internals of some other pumps.

Suitable for virtually all fluids, this will handle diesel, kerosene, oils, water etc...

For use with any power drill, electric, air or cordless. The faster the drill the faster the water flows.

Fitted with an 8mm drill shaft which will fit in any 3/8" or 1/2" drill chuck.

Maximum 3,000 RPM.

Maximum output of 3000 litres per hour working at a speed of 3,000 RPM

Maximum pumping height of 20 metres.

Maximum output pressure of 3 bar @ 3000 RPM.

The ends of the pump have a 1" screw thread for use with 1/2" and 3/4" diameter hose.

Please note; This pump is not suitable for pumping petrol. The pump would handle the fluid but there is a risk of sparks from the drill motor (even on air drills) so should not be used.

Vat Receipt Included.