750kg Trailer Suspension Units Wheels Tyre 145 x 10" 4PLY 4"PCD 4 Stud Hub Bearing
%20Specifications:%20High%20OEM%20quality,%20as%20used%20in%20our%20own%20trailer%20factory.%2010%22%20Steel...){kind=link}
Regular price
£375.95 GBP
Sale price
£375.95 GBP
Description
Wheels (Pair) Specifications:
High OEM quality, as used in our own trailer factory.
10" Steel Wheel, 4" PCD. (See our PCD guide below if you are unsure about this)
Fitted with a 14510" RADIAL Tubeless Tyre. Max load 375kg (750kg per axle) with a 4 PLY Rating.
PLEASE NOTE; If your trailer was built on second hand mini wheels like many older trailers, then this wheel is the new replacement but it has a different offset to a mini wheel. They will fit the mini hub with no problems but will stick out from the trailer just over an inch more than before. In many cases this is ok but in some cases it is necessary to space the mudguard out for it to fully cover the wheel in order to use these wheels.
Guide to Wheel PCD
To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD. PCD stands for ?pitch circle diameter? and is the diameter of a circle drawn through the centre of all the wheels bolt holes. On a four stud wheel this is very easy to measure, simply by measuring the distance between the centres of two diagonally opposite wheel studs as shown below.
The PCD can be measured in millimetres or in inches. If you have any problems or are not sure please do not hesitate to contact for advice either by eBay message or by telephone on 01782 642122. If you do purchase a wheel and tyre that does not fit your trailer then we are happy to accept a return for exchange or refund as we are on any of our items. The item must be unused and you are responsible for postage costs.
Hub Specifications:
This listing is for a pair of hub sets. They are available in individually or with suspension units in our shop.
High quality cast construction.
Fits a standard 1" trailer stub axle.
4" PCD Hub, 4 stud.
Complete fitted with 3/8" wheel studs and the bearing races are already pressed into the hub, meaning no specialist tools are required to fit.
Includes;
1 x Cast Hub.
1 x Outer Bearing.
1 x Inner Bearing.
1 x Hub Cap.
4 x Wheel Nuts.
Suitable stub axles and suspension units are available in our shop.
Suspension Unit Specifications:
This listing is for a pair (left and right) of suspension units.
Fitted with standard 1" trailer stub axles. Also available with hubs in our shop.
Very heavy duty construction make these suitable for daily use by business. Far tougher and long lasting than most 750kg suspension units.
Maximum weight (per pair) 750kg
Features a solid suspension arm for strength and less prone to rusting than cheap hollow box section suspension arms.
Complete with washers and castle nuts for mounting the hubs.
Other parts such as wheels, bearings, mounting plates etc. are available in our shop.
Mounting holes sizes are as pictured.
High OEM quality, as used in our own trailer factory.
10" Steel Wheel, 4" PCD. (See our PCD guide below if you are unsure about this)
Fitted with a 14510" RADIAL Tubeless Tyre. Max load 375kg (750kg per axle) with a 4 PLY Rating.
PLEASE NOTE; If your trailer was built on second hand mini wheels like many older trailers, then this wheel is the new replacement but it has a different offset to a mini wheel. They will fit the mini hub with no problems but will stick out from the trailer just over an inch more than before. In many cases this is ok but in some cases it is necessary to space the mudguard out for it to fully cover the wheel in order to use these wheels.
Guide to Wheel PCD
To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD. PCD stands for ?pitch circle diameter? and is the diameter of a circle drawn through the centre of all the wheels bolt holes. On a four stud wheel this is very easy to measure, simply by measuring the distance between the centres of two diagonally opposite wheel studs as shown below.
The PCD can be measured in millimetres or in inches. If you have any problems or are not sure please do not hesitate to contact for advice either by eBay message or by telephone on 01782 642122. If you do purchase a wheel and tyre that does not fit your trailer then we are happy to accept a return for exchange or refund as we are on any of our items. The item must be unused and you are responsible for postage costs.
Hub Specifications:
This listing is for a pair of hub sets. They are available in individually or with suspension units in our shop.
High quality cast construction.
Fits a standard 1" trailer stub axle.
4" PCD Hub, 4 stud.
Complete fitted with 3/8" wheel studs and the bearing races are already pressed into the hub, meaning no specialist tools are required to fit.
Includes;
1 x Cast Hub.
1 x Outer Bearing.
1 x Inner Bearing.
1 x Hub Cap.
4 x Wheel Nuts.
Suitable stub axles and suspension units are available in our shop.
Suspension Unit Specifications:
This listing is for a pair (left and right) of suspension units.
Fitted with standard 1" trailer stub axles. Also available with hubs in our shop.
Very heavy duty construction make these suitable for daily use by business. Far tougher and long lasting than most 750kg suspension units.
Maximum weight (per pair) 750kg
Features a solid suspension arm for strength and less prone to rusting than cheap hollow box section suspension arms.
Complete with washers and castle nuts for mounting the hubs.
Other parts such as wheels, bearings, mounting plates etc. are available in our shop.
Mounting holes sizes are as pictured.
750kg Trailer Suspension Units Wheels Tyre 145 x 10" 4PLY 4"PCD 4 Stud Hub Bearing
