9 Litre Manual And Pneumatic Oil Suction Fluid Extractor Transfer Vacuum Pump

Professional fluid extractor for commercial or occasional use

Manual and pneumatic fluid extractor can be used automatically with standard shop air or manually when compressor air is not available (this makes this tool useable in all sorts of circumstances)

This 9-litre (2.35 gallons) capacity fluid extractor is constructed from composite materials for strength and durability

Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery

This extractor is also suitable for low viscosity fluids such as water so you can also use this item for draining fish tanks, basins and sinks

Simple to use simply push the button and this allows you to suck liquids from tanks quickly and easily

Stick the extraction tube into the dipstick until the tube reaches the bottom of the oil pan, turn the air valve to open and then push the operating button

When the suction unit reaches full the extractor will automatically shut off leaving no spills or mess

Comes complete with brake tubes with rubber tubes, extracting tube and main suction tube

Supplied with 6mm and 10mm (internal dimensions) suction probes and brake / clutch bleeding hose

Use probes to extract engine oil through the dipstick hole

Working pressure from 70 - 170 PSI

Air inlet size 1/4 BSP

Air consumption 5 cfm

SPECIFICATIONS

• Pneumatic and manual fluid extractor
• Total capacity - 9 Litres
• Working pressure 70 - 170 PSI
• Air Inlet size - 1/4" BSP
• Air consumption - 5 CFM
• Automatic off switch