Motorcycle Bike Shock Coil Spring Compressor Suspension Unit Set 100 – 20mm

Professional coil spring compressor for commercial or occasional use

Motorcycle coil spring compressor

These simple but highly effective spring compressors are essential for the easy / safe assembly and disassembly of motorcycle suspension units

Suitable for most types of classic and modern motorcycle coil springs

Designed specifically for twin rear shocks on most bikes

100mm max opening jaw width minimum 20mm

Set comes as with 2 spring compressors for use opposite on the coil spring

Also comes complete with 4 additional spare claws if needed

Always make sure to release the coil equally on either side

Designed to be used by either a 17mm spanner or 3/8” drive ratchet for optimum performance

SIMPLE TO USE

1. Ensure the two bars are directly opposite each other
2. Hook the claw over the bottom complete coil and wind down the bolt until gently secured on the top complete coil
3. Attach the other bar to the other side (directly opposite) and wind down the bolt to equal distance
4. Wind down the bar equally on each side of the coil until the required compression is achieved

Comes in a metal tin for easy storage and transportation