Trailer Wheel and Tyre 145 x 10" 8 PLY 4"pcd TRSP04
Regular price
£71.90 GBP
Sale price
£71.90 GBP
Description
This listing is for one trailer wheel and tyre.
High OEM quality, as used in our own trailer factory.
10" Steel Wheel, 4" PCD. (See our PCD guide below if you are unsure about this)
Fitted with a 14510" RADIAL Tubeless Tyre. Max load 500kg (1000kg per axle) with a 8 PLY Rating.
PLEASE NOTE; If your trailer was built on second hand mini wheels like many older trailers, then this wheel is the new replacement but it has a different offset to a mini wheel. They will fit the mini hub with no problems but will stick out from the trailer just over an inch more than before. In many cases this is ok but in some cases it is necessary to space the mudguard out for it to fully cover the wheel in order to use these wheels.
Guide to Wheel PCD
To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD.
PCD stands for pitch circle diameter and is the diameter of a circle drawn through the centre of all the wheels bolt holes. On a four stud wheel this is very easy to measure, simply by measuring the distance between the centres of two diagonally opposite wheel studs
The PCD can be measured in millimetres or inches. If you are not sure please contact for advice via message.
High OEM quality, as used in our own trailer factory.
10" Steel Wheel, 4" PCD. (See our PCD guide below if you are unsure about this)
Fitted with a 14510" RADIAL Tubeless Tyre. Max load 500kg (1000kg per axle) with a 8 PLY Rating.
PLEASE NOTE; If your trailer was built on second hand mini wheels like many older trailers, then this wheel is the new replacement but it has a different offset to a mini wheel. They will fit the mini hub with no problems but will stick out from the trailer just over an inch more than before. In many cases this is ok but in some cases it is necessary to space the mudguard out for it to fully cover the wheel in order to use these wheels.
Guide to Wheel PCD
To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD.
PCD stands for pitch circle diameter and is the diameter of a circle drawn through the centre of all the wheels bolt holes. On a four stud wheel this is very easy to measure, simply by measuring the distance between the centres of two diagonally opposite wheel studs
The PCD can be measured in millimetres or inches. If you are not sure please contact for advice via message.
Trailer Wheel and Tyre 145 x 10" 8 PLY 4"pcd TRSP04
